Only medical facilities

Duotrol® CSQ Advanced Level 1 – Liquid CSF Quality Control

EAN: 04260481081592
Article number
107233
Packaging unit
1 x 3 mL

Duotrol® CSQ Advanced CSF Level 1 is a liquid quality control for CSF determinations at low clinically relevant levels.

€69.55
Excl. 19% VAT , excl. Shipping Cost

Duotrol® CSQ Advanced Level 1 – Liquid CSF Quality Control

Duotrol® CSQ Advanced Level 1 is a ready-to-use liquid CSF quality control material designed for quantitative cerebrospinal fluid (CSF) testing on clinical chemistry analyzers. Representing the lower of the two clinically relevant control levels, it supports the verification of precision and accuracy of in vitro diagnostic measurements in routine laboratory practice.

Used alongside patient samples as part of internal quality control procedures, Duotrol® CSQ Advanced Level 1 helps laboratories continuously monitor analytical performance within the lower clinically relevant concentration range. The control material is intended for professional use by trained laboratory personnel and can be integrated into established quality management workflows.

Quality Control for Lower Clinically Relevant Concentrations

Reliable internal quality control is essential for obtaining accurate and reproducible CSF test results. Because many analytes are present in cerebrospinal fluid at comparatively low concentrations, analytical performance must be monitored carefully to ensure consistent measurement quality.

Duotrol® CSQ Advanced Level 1 has been developed to support quality assurance within the lower clinically relevant concentration range. It enables laboratories to verify method performance during routine operation and contributes to the early detection of analytical deviations before they affect patient reporting.

A complete overview of the supported analytes is available in the Parameters section of this product page and in the current product documentation.

Ready-to-use Liquid Quality Control

As a liquid quality control material, Duotrol® CSQ Advanced Level 1 is supplied ready for use without reconstitution. Before analysis, the vial should be mixed carefully by gentle inversion to ensure a homogeneous solution.

The control material is processed in the same manner as a patient sample on the respective clinical chemistry analyzer, allowing seamless integration into existing laboratory workflows. Appropriate reagents and calibrators should be used according to the analyzer manufacturer's instructions and the laboratory's established quality control procedures.

Independent Quality Control for Clinical Chemistry

Duotrol® quality controls are manufactured independently of instrument, reagent and assay manufacturers. This independent approach enables laboratories to assess analytical performance objectively across different analytical platforms, provided that the respective methods have been validated.

Independent quality control materials help laboratories maintain confidence in analytical performance while supporting standardized internal quality assurance procedures. Their use also aligns with the principles of ISO 15189, which emphasizes continuous monitoring of laboratory quality and competence.

Quality Assurance According to Recognised Laboratory Standards

Consistent internal quality control is fundamental to maintaining reliable analytical performance in CSF diagnostics. Regular verification of precision and accuracy helps laboratories identify analytical deviations at an early stage and contributes to the long-term reliability of patient results.

Target values for Duotrol® CSQ Advanced are established for each production lot according to the analytical method and instrument. The corresponding target ranges are based on the quality assurance requirements defined by the German Medical Association (Rili-BÄK). In addition, good laboratory practice recommends that every laboratory establishes and continuously evaluates its own target ranges according to the analytical systems and methods in use.

Two Clinically Relevant Control Levels

Duotrol® CSQ Advanced is available as a two-level quality control system for quantitative CSF testing. Level 1 represents the lower clinically relevant control level, while Level 2 is designed to monitor analytical performance within the higher clinically relevant concentration range.

Using both control levels together enables laboratories to evaluate analytical performance across different concentration ranges and supports comprehensive internal quality control throughout routine laboratory operation.

Further Reading

Reliable internal quality control is an essential component of modern CSF diagnostics. Laboratories seeking additional background information on quality management, the selection of suitable control materials and current challenges in cerebrospinal fluid testing can find further insights in the BIOMED Laboratory Blog.

Recommended article:

Quality Control in CSF Diagnostics – Standardised or Economy-Based?

Benefits of Duotrol® CSQ Advanced Level 1

  • Ready-to-use liquid quality control material
  • Designed for quantitative CSF testing
  • Lower clinically relevant control level
  • Verification of precision and accuracy
  • Easy integration into routine laboratory workflows
  • Independent quality control material
  • Suitable for use on a wide range of clinical chemistry analyzers
  • Supports internal quality assurance according to recognised laboratory standards

Frequently Asked Questions (FAQ)

What is Duotrol® CSQ Advanced Level 1 used for?

Duotrol® CSQ Advanced Level 1 is used for the quantitative verification of precision and accuracy in CSF testing. Representing the lower clinically relevant control level, it supports routine internal quality control on clinical chemistry analyzers.

Is reconstitution required before use?

No. Duotrol® CSQ Advanced Level 1 is supplied as a ready-to-use liquid quality control material. After gentle mixing by inversion, it can be processed according to the laboratory's standard operating procedures.

Is the control material instrument-specific?

No. Duotrol® CSQ Advanced is manufactured independently of instrument and reagent manufacturers. It can be used on different clinical chemistry platforms provided that method-specific target values are available.

Where can I find the supported analytes?

A complete overview of all supported analytes is available in the Parameters section of this product page. Method- and instrument-specific target values are provided in the current product documentation.

What is the difference between Level 1 and Level 2?

Level 1 represents the lower clinically relevant control level and is intended for monitoring analytical performance within lower concentration ranges. Level 2 complements the system by covering the higher clinically relevant control level, allowing comprehensive performance monitoring across different concentration ranges.

More Information
Parameter Albumin, Chlorid, Total Protein, Glucose, IgA, IgG, IgM, Lactate, Sodium
Packaging unit 1 x 3 mL

If required, we can provide you with device-specific target values using statistical analysis. Information on participating in target value determination can be found here.

A product-specific IFU, including current target values, safety data sheets (MSDS), data sheets instead of MSDS, and CoAs are available as PDF downloads directly from our database: https://dokumente.biomed.de/

You will find your login details on your delivery note.

are usually dispatched on the same day (no dispatch on Fridays)
Orders placed before 12 noon
are usually dispatched on the same day (no dispatch on Fridays)
in an environmentally friendly box
Refrigerated shipping
in an environmentally friendly box
from 2.000 € Germany-wide
Free shipping
from 2.000 € Germany-wide