Only medical facilities

Duotrol® Urine Liquid Level 2 – High-Level Urine Control

EAN: 04260481081844
Article number
107452
Packaging unit
1 x 15 mL

Liquid urine quality control for monitoring clinical chemistry testing at a high control level.

€26.86
Excl. 19% VAT , excl. Shipping Cost

Duotrol® Urine Liquid Level 2 – Quality Control at a High Control Level

Duotrol® Urine Liquid Level 2 is a liquid urine quality control material for clinical chemistry testing at a high control level. It supports medical laboratories in monitoring the precision and accuracy of analytical procedures at higher analyte concentrations.

Level 2 represents the higher of the two clinically relevant control levels available for Duotrol® Urine Liquid. It enables laboratories to verify whether an analytical procedure performs reliably within this concentration range and meets the established quality requirements.

Duotrol® Urine Liquid Level 1 is available for complementary monitoring at a low control level. Using both control levels allows analytical performance to be assessed across different concentration ranges.

Why Is Quality Control at Higher Analyte Concentrations Important?

The performance of a clinical chemistry testing procedure should be monitored across different concentration ranges. An acceptable control result at low concentrations does not necessarily demonstrate that a method provides the required precision and accuracy at higher concentrations.

Duotrol® Urine Liquid Level 2 provides a high, clinically relevant control level for this purpose. Regular control measurements help laboratories monitor analytical performance within this range and can support the early detection of deviations during routine testing.

Control results are not interpreted as patient results. They are used to assess analytical performance and are compared with the control ranges established for the respective lot, method or analyzer combination.

Which Parameters Can Be Monitored with Duotrol® Urine Liquid Level 2?

Level 2 can be used for quality control of numerous clinical chemistry urine parameters. Depending on the analytical system and method used, target values or target ranges are available for parameters including:

  • Amylase
  • Calcium
  • Chloride
  • Cortisol
  • Creatinine
  • Total protein
  • Glucose
  • Uric acid
  • Urea or urea nitrogen
  • Potassium
  • Magnesium
  • Microalbumin
  • Sodium
  • Phosphorus

Method-specific values are also available for physical properties including osmolality, pH and specific gravity.

For hCG testing, Level 2 represents a positive control level.

The parameters that can be monitored in a particular laboratory depend on the analyzer and method combination used and the corresponding target values available.

High Control Level for Internal Quality Control

The concentrations of various analytes are intentionally higher in Level 2 than in Level 1. This allows the analytical performance of a testing procedure to be assessed separately at higher analyte concentrations.

Monitoring different concentration levels is an important element of internal quality control. Deviations in analytical performance may have different effects depending on the analyte concentration. A control material at a high level therefore provides additional information that cannot be obtained from monitoring only the low control level.

Duotrol® Urine Liquid Level 2 therefore complements Level 1 as part of a multi-level quality control approach.

Device- and Method-Specific Target Values

Target values for Duotrol® Urine Liquid are determined on a lot-specific basis using representative measurements. Depending on the analyte, values are specified for particular analyzers or methods.

For Level 2, target values are available for clinical chemistry analyzer systems from manufacturers including Abbott, Beckman Coulter, DiaSorin, Roche and Siemens.

The specified target ranges correspond to the maximum permissible deviation from the assigned value according to the German Medical Association guidelines on quality assurance in medical laboratory examinations (Rili-BÄK).

Good laboratory practice additionally recommends that each laboratory establish its own control ranges, taking into account the methods used and the individual laboratory conditions.

Independent Quality Control of Analytical Performance

Duotrol® Urine Liquid is manufactured independently of clinical chemistry analyzer manufacturers and has not been developed exclusively for instruments, test kits or methods from a particular manufacturer.

Independent control material allows laboratories to monitor analytical performance without relying exclusively on control materials associated with a specific analytical system.

This can be particularly useful for laboratories operating different analyzer systems or methods and allows the control material to be integrated into established quality assurance procedures.

Liquid Human Urine Matrix for Routine Laboratory Use

Duotrol® Urine Liquid Level 2 is based on a liquid human urine matrix. As the control material is supplied in liquid form, no reconstitution is required before use.

Before each use, the vial is gently inverted to obtain a homogeneous solution. The control material is then processed in the respective clinical chemistry analyzer in the same way as a patient sample.

Duotrol® Urine Liquid Level 2 is intended exclusively for diagnostic use in vitro and should be handled by appropriately trained laboratory professionals.

How Is Duotrol® Urine Liquid Level 2 Used?

The quality control material is processed according to the requirements of the respective clinical chemistry analyzer. Before measurement, the material is homogenized by gently inverting the vial.

Appropriate reagents for the respective parameter and a suitable calibrator are required for the measurement.

After analysis, the measured control value is compared with the control range established for the respective lot, method or analyzer combination. This allows the laboratory to assess whether the analytical procedure is performing within the specified requirements at the high control level.

After removing the required amount of control material, the vial should be closed immediately and returned to refrigerated storage.

Level 2 as a Complement to Level 1

Quality control at multiple concentration levels enables a more differentiated assessment of analytical procedures.

Duotrol® Urine Liquid Level 2 covers the high control level. Duotrol® Urine Liquid Level 1 is available for monitoring at lower analyte concentrations.

The two control materials therefore serve different purposes within laboratory quality assurance and complement each other. Using both levels enables analytical performance to be monitored across different concentration ranges.

Storage and Stability

Duotrol® Urine Liquid Level 2 should be stored at +2 °C to +8 °C and must not be frozen.

When stored correctly, unopened control material remains stable until the stated expiry date. After opening, the parameters generally remain stable until the expiry date when stored at +2 °C to +8 °C.

Creatinine values may decrease during storage. Visible turbidity can indicate microbial growth. An affected vial must not be used.

Product Characteristics of Duotrol® Urine Liquid Level 2

Product: Duotrol® Urine Liquid Level 2

Control level: High

Application: Quality control of clinical chemistry urine measurements

Matrix: Human urine matrix

Format: Liquid

Pack size: 1 × 15 mL

Article number: 107452

Storage: +2 °C to +8 °C

Use: Clinical chemistry analyzers

Quality Control at a High Control Level with Duotrol® Urine Liquid Level 2

Duotrol® Urine Liquid Level 2 enables laboratories to specifically monitor clinical chemistry urine measurements at a high control level. The liquid human urine matrix can be integrated into routine internal quality control without prior reconstitution.

Device- and method-specific target values for numerous urine parameters support the assessment of analytical performance at higher analyte concentrations.

For quality control across different concentration ranges, Level 2 can be complemented by Duotrol® Urine Liquid Level 1. Further control materials for different areas of laboratory diagnostics are available in our Quality Controls category.

Frequently Asked Questions About Duotrol® Urine Liquid Level 2

What Is Duotrol® Urine Liquid Level 2?

Duotrol® Urine Liquid Level 2 is a liquid quality control material based on a human urine matrix. It is used to monitor the precision and accuracy of clinical chemistry urine measurements at a high control level.

What Is Level 2 Used For?

Level 2 is used to monitor analytical procedures at higher analyte concentrations. This allows laboratories to assess whether a testing procedure performs within the established requirements at a high control level.

What Is the Difference Between Level 2 and Level 1?

Duotrol® Urine Liquid Level 2 represents the high control level, whereas Level 1 covers the low control level. Using both levels allows analytical performance to be monitored across different concentration ranges.

Which Parameters Can Be Monitored with Level 2?

Depending on the analyzer and method used, target values are available for numerous parameters, including creatinine, microalbumin, glucose, calcium, sodium, potassium, chloride, phosphorus, magnesium, uric acid, urea, amylase, total protein and cortisol.

What Is the Role of Level 2 in hCG Quality Control?

For hCG, Duotrol® Urine Liquid Level 2 represents a positive control level. Level 1, in contrast, represents a negative control level.

Does Duotrol® Urine Liquid Level 2 Require Reconstitution?

No. The control material is supplied in liquid form and does not require reconstitution. Before use, the vial is gently inverted to obtain a homogeneous solution.

Is Duotrol® Urine Liquid Level 2 Limited to a Specific Analyzer Manufacturer?

No. The control material is independently manufactured and has not been developed exclusively for analytical systems, test kits or methods from a particular manufacturer. Suitable target values or laboratory-established control ranges must be available for the method used.

How Should Duotrol® Urine Liquid Level 2 Be Stored?

The control material should be stored at +2 °C to +8 °C and must not be frozen.

What Is the Pack Size of Duotrol® Urine Liquid Level 2?

Duotrol® Urine Liquid Level 2 is supplied as 1 × 15 mL. The article number is 107452.

More Information
Parameter Amylase, Calcium, Chlorid, Cortisol, Creatinine, Total Protein, Glucose, Uric Acid, Urea, Urea nitrogen, hCG, Potassium, Magnesium, Microalbumin, Sodium, pH, Phosphorus, spec. weight
Packaging unit 1 x 15 mL

If required, we can provide you with device-specific target values using statistical analysis. Information on participating in target value determination can be found here.

A product-specific IFU, including current target values, safety data sheets (MSDS), data sheets instead of MSDS, and CoAs are available as PDF downloads directly from our database: https://dokumente.biomed.de/

You will find your login details on your delivery note.

are usually dispatched on the same day (no dispatch on Fridays)
Orders placed before 12 noon
are usually dispatched on the same day (no dispatch on Fridays)
in an environmentally friendly box
Refrigerated shipping
in an environmentally friendly box
from 2.000 € Germany-wide
Free shipping
from 2.000 € Germany-wide